Yaskawa iQpump Micro - Manual (Page 36)

i.1 Preface
Yaskawa manufactures products used as components in a wide variety of industrial systems and equipment. The selection and
application of Yaskawa products remain the responsibility of the equipment manufacturer or end user. Yaskawa accepts no
responsibility for the way its products are incorporated into the final system design. Under no circumstances should any
Yaskawa product be incorporated into any product or design as the exclusive or sole safety control. Without exception, all
controls should be designed to detect faults dynamically and fail safely under all circumstances. All systems or equipment
designed to incorporate a product manufactured by Yaskawa must be supplied to the end user with appropriate warnings and
instructions as to the safe use and operation of that part. Any warnings provided by Yaskawa must be promptly provided to
the end user. Yaskawa offers an express warranty only as to the quality of its products in conforming to standards and
specifications published in the Yaskawa manual. NO OTHER WARRANTY, EXPRESS OR IMPLIED, IS OFFERED.
Yaskawa assumes no liability for any personal injury, property damage, losses, or claims arising from misapplication of its
products.
This manual is designed to ensure correct and suitable application of drives. Read this manual before attempting to install,
operate, maintain, or inspect a drive and keep it in a safe, convenient location for future reference. Be sure you understand all
precautions and safety information before attempting application.
u Applicable Documentation
The following manuals are available for iQpump Micro drives:
Micro
AVERTISSEMENT
Lire le manuel avant l'installation.
Attendre 5 minutes apres la coupure de l'alimentation,
pour permettre la decharge des condensateurs.
WARNING
Read manual before installing.
Wait 5 minutes for capacitor discharge after
disconnecting power supply. Risk of electric shock.
Risque de decharge electrique.
iQpump Micro Quick Start Procedure (TOEPYAIQPM01)
This sheet is packaged together with the drive and contains a step-by-step guide to enable the user to properly wire the drive
and motor and connect the 24 V power supply.
iQpump Micro AC Drive Quick Start Guide (TOEPYAIQPM02)
Read this guide first. This guide is packaged together with the product and contains basic information required to install and
wire the drive. It also gives an overview of fault diagnostics, maintenance, and parameter settings. The purpose of this guide
is to prepare the drive for basic operation. The most recent version of this manual is available for download on our
documentation website, www.yaskawa.com.
iQpump Micro AC Drive User Manual (TOEPYAIQPM03)
This manual provides detailed information on parameter settings, fault diagnostics, and drive functions. Use this manual to
expand drive functionality and to take advantage of higher performance features. The most recent version of this manual is
available for download on our documentation website, www.yaskawa.com.
u Symbols
Note: Indicates a supplement or precaution that does not cause drive damage.
TERMS TERMS
Indicates a term or definition used in this manual.
u Terms and Abbreviations
• Drive: Yaskawa iQpump Micro Intelligent Pump Controller
• BCD: Binary Coded Decimal
• H: Hexadecimal Number Format
• IGBT: Insulated Gate Bipolar Transistor
• kbps: Kilobits per Second
• MAC: Media Access Control
• Mbps: Megabits per Second
• r/min: Revolutions per Minute
• V/f: V/f Control
u Trademarks
• Modbus is a trademark of Schneider Electric.
• Other companies and product names mentioned in this manual are trademarks of those companies.
i.1 Preface
36 YASKAWA TOEP YAIQPM 03B YASKAWA AC Drive - iQpump Micro User Manual