SMA Sunny Data Control V.4.2 - Manual (Page 68)

Displaying Data SMA Technologie AG
Page 68 SDC-TEN080642 User Manual
10. 3 Setting the Performance Display
The individual device fields in the
device overview can change color
according to the devices' calculated
capacity utilization.
The capacity utilization is calculated
on the basis of one channel (default
channel: The color behavior of the
device field during spot value
querying is determined by this
channel, and by the value for 100 %
capacity utilization.
You can change the channel, and
specify the threshold channel value,
which is to indicate that the device is
performing at 100 % capacity. The performance display can be defined for individual
devices, or for a device type.
1.
In the device overview, use the right mouse button to click on the field of the device
for which you wish to configure the performance display. The device overview
menu opens.
2. Select "Channel Selection“. The
window for setting the selected de-
vice's channels opens (see figure to
the right).
You can also call up the window in
the following way: select the device
for which you wish to set the chan-
nels by clicking on the device's field
with the left mouse button in the de-
vice overview.
3. Under "Channel selection is valid
for" (see figure to the right), select
whether you wish to set the perfor-
mance display for this device only
(previously clicked on), or for all de-
vices of a particular type.
Device overview