SMA Sunny Data Control V.4.2 - Manual (Page 112)

Managing Data and Saving Data Locally SMA Technologie AG
Page 112 SDC-TEN080642 User Manual
11.6. 2 Setting Time Ranges
With Sunny Data Control, you can set the readout time ranges of all channels, or of
individual channels.
1. If you wish to set the time range for individual channels, hold down the "Ctrl" key
and mark the desired channels.
1. Click on the "Archiv channels" page (see figure below) with the right mouse button,
and select "Select channel time range".
2. Select "All channels" or "Selected channels only".
The window for setting the time range opens.
3. Set the desired time range (beginning and end) by clicking with the cursor on the
beginning or end of the selection area, and moving the selection area. The date
of the new time range is displayed immediately.
4. Click on Save to save the settings.
Altered
cursor
New date