SMA Sunny Data Control V.4.2 - Manual (Page 49)

SMA Technologie AG Initial Settings
User Manual SDC-TEN080642 Page 49
The network settings window opens.
Local network
5. If you wish to detect all devices which are connected to your local network, add
a check mark alongside "Access to all devices in the local network..." .
6. If you wish to detect additional devices, click
on . The window for configuration of a
new connection opens.
7. In the field "IP address or DNS name", enter
the IP address or DNS name of the device in
the network which you wish to detect.
The de-
fault IP address of a Sunny Boy Control is 10.170.170.170.
8. Then click on . The IP address or
DNS name of the device is displayed in
the "Use always additional devices:" win-
dow (see the example in the illustration
with IP address entered). Using
you can delete the currently selected de-
vice again.
Select whether all devices in the local
Define which additional devices
network are to be detected.
are to be detected
(add IP addresses or DNS names
Select whether RAS is to be used
(set the telephone number
of the devices).
of the external modem).