SMA Sunny Data Control V.4.2 - Manual (Page 54)

Initial Settings SMA Technologie AG
Page 54 SDC-TEN080642 User Manual
8.4. 1 Narrowing the Scope of Device Detection
The scope of device detection can be limited to the communication devices and the
inverters connected to them, or to an inverter connected directly to the PC.
1.
Select "Options / Settings", or click on the "Settings" icon (see figure
to the right).
The "Settings" window opens.
2. Select "Misc“.
3. Beneath "Device detection mode, searching for", you can select whether the scope
of the search is to include data loggers (communication devices) with inverters
and/or directly connected inverters.
Add or remove check marks in the appropriate fields.
4. Click on Save to save the settings.
5. Start the device detection process, as described in section 8. 4 „Detecting Devic-
es” (page 53).