SMA Sunny Data Control V.4.2 - Manual (Page 107)

SMA Technologie AG Managing Data and Saving Data Locally
User Manual SDC-TEN080642 Page 107
11.4. 3 Sending Data to Sunny Portal
How to send data to Sunny Portal is described starting on chapter 12. 3 „Configuring
Sunny Portal Mail” (page 129).
11. 5 Setting up Sunny Boy Control Channel Recording
With Sunny Data Control, you can select channels which the Sunny Boy Control is to
record. By default, the Sunny Boy Control records the channels "Pac", "E-total" and
"Upv" from the detected inverters.
With Sunny Data Control, you can then read out, save, and process the recorded
channels.
1.
Click on the "Channel recording" tab at the lower edge of the screen (see figure
below).
2. In the plant tree (see figure above), click on the device for which you wish to set
channels to be recorded.
The function "Channel recording" is only available for Sunny Boy Control devices
with firmware version 3.05 or above. Sunny Boy Control Light does not support
these settings.
"Channel recording" tab Plant tree