SMA Sunny Data Control V.4.2 - Manual (Page 50)

Initial Settings SMA Technologie AG
Page 50 SDC-TEN080642 User Manual
RAS Connection
You can access an external modem (if access to it has been enabled for you) via an
RAS connection, in order to query the data from Sunny Data Control on this connection.
If you wish to access an external modem from your PC, the RAS service must be installed
and configured on your PC, and on the PC which you wish to access.
9.
If you wish to detect devices via an RAS connection, place a check mark in the
"Use RAS" check box. The RAS connection configuration window opens (see fig-
ure below).
10. Connection name:In the field "Connection name", enter the name with which you
wish to identify this connection (e.g. Smith Family). Choose a descriptive name, so
that you can recognize the connection.
11. Telephone number:In the field "Telephone number", enter the telephone number
of the modem (connection) which you wish to access.
12. Select the type of connection in the drop-down list "Connection via..."
13. User name:In the "User name" field, enter the user name which has been conveyed
to you by the owner of the connection.
14. Password:In the "Password" field, enter the password which has been conveyed
to you by the owner of the connection.
15. If you wish to test whether the connection is functioning, click on Testing connec-
tion.
16. Click on Save to save the settings. The new connection is displayed in the field
"Phonebook entries".
17. Click on Apply. The "Current device connections" window is displayed once more.