SMA Sunny Data Control V.4.2 - Manual (Page 51)

SMA Technologie AG Initial Settings
User Manual SDC-TEN080642 Page 51
18. In the "Using transport protocol" drop-down list, select the appropriate transport
protocol for the connected device, as described in section 8.3. 5 „Setting the
Transport Protocol” (page 52).
19. Click on to apply the settings.
8.3. 4 Sunny Beam (USB)
1. Select "Options / Settings", or click on the "Settings" icon (see figure to
the right). The "Settings" window opens.
2. Select "Communica-
tion".
3. In the drop-down list
"Connection by", se-
lect "Sunny Beam
(USB)".
4. If you wish to see which Sunny Beam devices are already detected, click on Set-
tings.
5. To save the settings, click on .