SMA Sunny Data Control V.4.2 - Manual (Page 131)

SMA Technologie AG Transferring Data to the Internet
User Manual SDC-TEN080642 Page 131
11. You can specify when the Sunny Portal e-mail is to be sent:
•
After automatic data download
For this option, automatic readout must be configured. See section 11. 7
„Configuring the Automatic Readout” (page 116).
• after manual data download
The Sunny Portal e-mail is sent whenever you read out the Sunny Boy Control's
data store. See section 11. 6 „Reading Out Data Saved on the Sunny Boy
Control” (page 109). Alternatively, the data is sent when you click on the menu
item "Extras / Send Sunny Mail".
Select the desired action by adding a check mark to the appropriate check box.
12. If the Internet connection is to be established automatically, add a check mark be-
side "Make automatic internet connection if needed".
Sending a Test E-Mail
13. You can test your settings by clicking on . If your settings are cor-
rect, you receive a test e-mail from Sunny Portal at the e-mail address which you
have specified.
In the event that you have not yet registered at Sunny Portal under the specified e-
mail address, an e-mail is automatically issued by Sunny Portal, advising you of
the need to register at Sunny Portal to enable your plant data to be set up.
If you have already registered at Sunny Portal under the specified e-mail address,
the e-mail indicates that you can send your plant data to Sunny Portal.
14. Click on Save to save the settings.