SMA Sunny Data Control V.4.2 - Manual (Page 55)

SMA Technologie AG Setting Parameters (Installer)
User Manual SDC-TEN080642 Page 55
9 Setting Parameters (Installer)
Sunny Data Control makes it possible to set parameters for inverters and for the Sunny
Boy Control, in order to specify operating modes for individual devices. The type and
scope of the displayed parameters depend on the security level. If you are logged in
as an installer, you can set more parameters. The security level is set via the menu item
"Extras / Security Level". See section 13. 10 „Changing the Security Level (Installer
Password)” (page 184). Type in the installer password there.
The "Parameters" window (third tab at the bottom) shows the parameter list of the
currently selected device from the plant tree.
Some parameters serve merely as information regarding the factory settings, whereas
others are adjustable. If you select an adjustable parameter, you can change the
present channel value in the "Channel value" field.
Brief Overview
With the Sunny Data Control program, your PV plant's safety-related
inverter parameters can be changed. Such parameters may only be
changed after consulting your energy supply company.
"Parameters" tab
channel value
Selected
device and
Channel
Apply
channel value
value
Apply
new channel
value to all
devices of the
Permanently save
same type
parameter settings
in device
Search for parameter