SMA Sunny Data Control V.4.2 - Manual (Page 151)

SMA Technologie AG Transferring Data to the Internet
User Manual SDC-TEN080642 Page 151
ChannelX, ChannelX.Name, ChannelX.Unit, ChannelX.SText (String)
With these parameters, all Internet channels which are to be displayed in the applet
within a component are defined. The "X" indicates the number of the channel, and must
be replaced accordingly. The sequence begins with "1" and ends at a maximum of
"10".
The ChannelX parameter describes the name of the Internet channel as defined in
Sunny Data Control (see section 12.6. 2 „Configuring and Activating the Internet
Server” (page 142)). As the channel name is thus named in the display within the
applet, you have the possibility of adapting the output text in the applet to another
language, with the parameter ChannelX.Name. The same applies to the channel unit,
which is defined by the parameter ChannelX.Unit. Unit and Name are optional.
With the parameter ChannelX.SText, you can assign a text to a channel's numerical
value. The texts are specified within the parameter, separated by commas. The first text
corresponds to the value "0". This parameter should only be used for status channels.
Status Channel SBC: Stop, wait, in operation, disruption, error, measuring
SWR Status Channel:
Erfassung“>
The example defines three channels: The first channel is "Betriebszeit", the
channel unit of which is displayed in the applet as "Stunden". Channel 2,
"Leistung" is indicated as "Performance" in the applet.