Grass Valley Machine Control Interfaces V.12.0 - Manual (Page 93)

Kalypso Machine Control Interfaces Installation Instructions 93
Section
4
Using the Encore Operational
User Interface (OUI)
Introduction
Kalypso system operators can use the Encore OUI to control external
devices independent of the Kalypso Machine Control subpanel. This can be
used for troubleshooting (as described earlier in the Profile installation sec-
tion), or a an additional control mechanism. After installation and configu-
ration, touching
Facility Manager on the Kalypso Home menu brings up the
Encore OUI.
To get the most out of this section, you should:
• Have a basic understanding of media clips,
• Know how files are organized and maintained on the Encore network,
and
• Know how to use any remote applications you select.
This section describes how to:
• Use the Encore Operational User Interface (OUI) and local applications,
• Use the Local Machine Control Panel to work with clips on networked
devices,
• Use the Filer-Fax to manage files, and
• Use the OmniPager to send short messages around the network.
Note The exact capabilities of your Encore system may vary. Refer to the separate
Encore Control System documentation for information about features not
covered in this section.