Grass Valley Machine Control Interfaces V.12.0 - Manual (Page 16)

16 Kalypso Machine Control Interfaces Installation Instructions
Section 1 — Machine Control Overview
9. Touch the Finish button. The following prompt will appear ( Figure 8 ).
Touch OK .
Figure 8. Completed Installation Prompt
10. If you upgraded existing machine control software and did NOT install
the default database, you must add a KAL user to the data base (see
Add User to Data Base on page 18 ). This is not necessary if the default
database was installed.
11. With the KAL user in the database, log off and back onto the computer.
Confirm Machine Control Support Installation
12. On startup the computer will load the Kalypso Menu application, as
usual, but the following applications also load:
• Encore User Interface
• SysMan3
• Portmapper
• Sharer (to exit Sharer you must first exit WatchDog)
• WatchDog (automatically reloads Sharer)
If you minimize the Kalypso Menu application, tabs for these applica-
tions will appear on the Windows task bar at the bottom of the screen.