Grass Valley Machine Control Interfaces V.12.0 - Manual (Page 26)

26 Kalypso Machine Control Interfaces Installation Instructions
Section 1 — Machine Control Overview
Restore Procedure
To restore the saved Machine Control configuration files, use Explorer to
drag the
Omn folder from the Zip disk to the C: directory on the Menu
panel, overwriting any existing folder with that name.
Restore After Drive Replacement
If you replace a Kalypso Enhanced Menu panel, or replace the NT drive of
an Original Menu panel, you will need to reinstall the Machine Control
software, and then restore the configuration file.
Enhanced Menu Panel Restore
1. Close all operations on the Menu panel.
2. Insert the Kalypso Software CD and follow the standard procedure to
install the Machine Control Support software.
3. Insert the Zip disk that contains the backup Machine Control
configuration files.
4. Use Explorer to drag the Omn folder from the Zip disk to the C:
directory on the Menu panel, overwriting any existing folder with that
name.
5. Restart Windows NT.
Original Menu Panel Restore
1. Install the Kalypso Menu panel software using the standard procedure.
2. Install the Machine Control Support software using the standard
procedure.
3. Use Explorer to drag the Omn folder from the Zip disk to the C:
directory on the Menu panel, overwriting any existing folder with that
name.
4. Restart the Windows OS.