Grass Valley Machine Control Interfaces V.12.0 - Manual (Page 23)

Kalypso Machine Control Interfaces Installation Instructions 23
Encore IP Address Change Procedure
Encore IP Address Change Procedure
The default Encore database installed from the Kalypso software CD con-
tains default IP addresses of the Kalypso system components and one
Profile VDR. These default addresses may need to be changed to support
larger installations. Changing these addresses when Encore has been
installed on the Kalypso Menu Processor involves the following steps:
• Run the Menu Processor and Encore under the old (default) address,
create copies, and change their IP addresses,
• Change the Menu Processor’s IP address to the new IP address,
• Restart Encore and delete the old IP addresses.
The following example procedure shows how to change from the default
addresses to the following new addresses (
Table 1 ).
You need a keyboard attached to the Main panel to perform this procedure.
To Modify Default Encore Database IP Addresses:
1. With Encore running (Sharer, System Manager and OUI), log on and
enter System Manager 3 application, User
SYS , no password.
2. Engines. Select. Should see address 192.168.0.10 (the profile) and
192.168.0.25 (menu processor as host for system manager).
3. Build a copy of Profile if you want to change its address:
a. Add , IP Address: 192.65.12.58 (for this example, use your profile
IP address).
b. Name: Profile 1. (The names can be duplicated here, we are
going to delete the old names).
c. Copy , at popup, select 192.168.0.10 (the old profile), Modify
4. Build a copy of System Manager to run at the new IP address:
a. Add , IP Address: 192.65.12.41 (the new IP address of the
Kalypso menu processor).
b. Name: Kalypso Menu
c. Copy , at popup, select 192.168.0.25 (the old menu processor default
IP address), Modify
Table 1. IP Address Changes
Device Default Address New Address
Kalypso Menu 192.168.0.25 192.65.12.41
Kalypso Frame 192.168.0.20 192.65.12.21
Profile 192.168.0.10 192.65.12.58