Grass Valley Machine Control Interfaces V.12.0 - Manual (Page 61)

Kalypso Machine Control Interfaces Installation Instructions 61
Test Configuration and Operation
6. Click on the Play symbol button in the center of the screen. Timecode
should advance while the clip plays (
Figure 53 ), demonstrating that
machine control exists.
Figure 53. Encore Profile Clip Playback
Test Kalypso Profile Interface Operation
Test that the Profile can be controlled directly with the Kalypso Machine
Control subpanel.
• Select a Profile channel to control on the PGM PST B bus (or whatever
bus has been delegated),
• Scroll through a list of available Profile clips, viewing their names on
the readout,
• Cue and load a selected clip, and
• Play, Stop, Fast Forward, and Rewind the loaded clip.
You have now completed the Profile interface installation and configura-
tion for Kalypso control.
Note You should now back up the Encore configuration files (see Saving Encore
Machine Control Configurations on page 25 ).