Grass Valley Machine Control Interfaces V.12.0 - Manual (Page 110)

110 Kalypso Machine Control Interfaces Installation Instructions
Section 4 — Using the Encore Operational User Interface (OUI)
Figure 88. Log Off Warning Message
CAUTION Before you turn off your workstation you must close down each remote
Encore application by selecting either the Disconnect or Drop Application
option to allow other Users access to those applications.
Local Machine Control Panel (LMCP)
The Local Machine Control Panel provides local control of the devices that
are available on the Encore Network. It also provides information on the
status of selected devices.
Note To use the LMCP you must have the proper software, and in some cases
hardware components or peripherals, properly installed and configured on
the device you wish to control. For example, to control a Grass Valley Group
Profile, you must purchase, install, and configure the optional VDRCS appli-
cation. Similarly, to control a VTR you must purchase, install, and configure
the Serial Control Engine peripheral, the VSVC application, and an RS-422
serial (machine control) cable.