Grass Valley Machine Control Interfaces V.12.0 - Manual (Page 18)

18 Kalypso Machine Control Interfaces Installation Instructions
Section 1 — Machine Control Overview
Add User to Data Base
If the machine control installation was an upgrade that did NOT include
installation of the default database, the user KAL must be added to the data
base. This permits automatic logon to the Encore User Interface when the
Menu panel boots up.
1. Touch the Facility Manager button on the Menu panel to bring up the
Encore User Interface (
Figure 10 ). The button on the lower right of the
menu is labeled Start when not logged on.
Figure 10.
2. Click on the Start button and log on to the Encore GUI as user SYS
( Figure 11 ). SYS will appear in place of Start on the lower right button.
Figure 11.