Grass Valley Machine Control Interfaces V.12.0 - Manual (Page 50)

50 Kalypso Machine Control Interfaces Installation Instructions
Section 2 — Profile Interface
Figure 41. Encore Welcome Message. KAL Login
3. Click the button on the lower right corner of the menu labeled either
Start (not logged in) or with the login name ( KAL is the default shown in
Figure 41 ). You may need to drag the window up to see the buttons.
4. If logged in as KAL the warning message shown in Figure 42 appears.
Select YES to log off, then click on the OFF LINE button on the lower
right.
Figure 42. Logoff Warning Message