Grass Valley Machine Control Interfaces V.12.0 - Manual (Page 101)

Kalypso Machine Control Interfaces Installation Instructions 101
Procedures
2. Type your User Identity (given to you by the System Administrator) into
the User ID Window; then press the Enter/Return key or click the Enter/
Return icon.
You can use either your workstation keyboard or the on-screen Alpha-
numeric Keypad. Type either upper or lower case characters — the ID
detector is not case-sensitive.
3. Type your password (given to you by the System Administrator); then
press the
Enter/Return key or click the Enter/Return icon.
Note Password entry is an optional feature, determined by the system configura-
tion; a password-entry window appears only if the option is chosen. The
password is case-sensitive — you must type it exactly as it was given to you
by the System Administrator.
A Welcome to Encore message is displayed, in addition to your user
information and any messages entered via the Manager Service
(System Manager) application or the System Administrator. Your User
Name (or the first part of it) appears on the
Start button. Icons that
enable you to access local OUI applications are displayed on the Task
Bar.
Figure 81. Typical Log-On Welcome Screen
4. Press the Enter/Return key on the keyboard or click the Enter/Return icon. A
list of remotely configured (i.e., server-based) Encore applications is
displayed in the center of the screen.