Grass Valley Machine Control Interfaces V.12.0 - Manual (Page 24)

24 Kalypso Machine Control Interfaces Installation Instructions
Section 1 — Machine Control Overview
5. Build a copy of the OUI to run at the new IP address.
a. Main Menu, Stations, Select . Should see addresses 192.168.0.20 (default
frame for the frame client) and 192.168.0.25 (default menu processor
for the OUI).
b. Add , IP Address: 192.65.12.41 (your new IP address for the
menu processor).
c. Name: Kalypso Menu.
d. Copy , at popup, select 192.168.0.25 (old menu address for OUI),
Modify
6. Create a new Frame Client for the new Frame IP address:
a. Add , IP Address: 192.65.12.21 (the new IP address of the
Kalypso Frame)
b. Name: Kalypso Frame
c. Copy , at popup, select 192.168.0.20 (the old default Kalypso frame
address), Modify
You should now have four entries in the stations/select popup:
192.168.0.20 (old frame address), 192.65.12.21 (new frame address),
192.168.0.25 (old menu processor address) and 192.168.12.41 (new
menu processor address). There should also be four entries in the
engines/select popup: 192.168.0.10 (old profile address), 192.65.12.58
(new profile address), 192.168.0.25 (old menu processor address) and
192.168.12.41 (new menu processor address).
7. Close Encore: stop OUI, sysman3 and Sharer.
8. Change IP address on the menu processor: my computer/Network/
TCP-IP/Properties. Enter 192.65.12.41. It is not necessary to reboot.
9. Restart Encore: start Sharer, Sysman3, and OUI.
10. Logon to Encore (user SYS, no password), enter application SYSTEM
MANAGER3.
11. Delete the engines and stations associated with the old IP addresses:
a. Engines , Select
b. Pick 192.168.0.10 (old Profile engine), Delete
c. Pick 192.168.0.25 (old Kalypso menu as host for manager engine),
Delete
d. Main Menu , Stations , Select
e. Pick 192.168.0.20 (old Kalypso frame host for frame client). Delete
f. Pick 192.168.0.25 (old Kalypso menu host for OUI). Delete
Encore should now be fully functional with the new addresses.