Dropping an application – Grass Valley Machine Control Interfaces V.12.0 User Manual
Page 104
104
Kalypso Machine Control Interfaces Installation Instructions
Section 4 — Using the Encore Operational User Interface (OUI)
3.
The other user acknowledges the Application Request Message by
clicking the
Enter/Return
icon. When the user exits the application, the
system sends you a message indicating that the application is available.
4.
You can load the application as described in
Figure 83. Typical Application Message Sharer Screen
Note
If you do not need the application urgently, click the Eject icon - no Applica-
tion Request Message is sent.
Dropping an Application
1.
Click the Title Box to display the OUI Station Status Window. The OUI
shows the application currently in use in the Application Area.
2.
Click the
Drop Application
button. If more than one application is open,
then the OUI shows the last application used. Continue to click the
Drop
Application
button until you close the applications you want to.
3.
Close the window by clicking the
Eject
button.
Figure 84. Application Section of the OUI Station Status Dialog Box