Grass Valley K2 Dyno v.2.0 - Manual (Page 95)

14 June 2011 K2 Dyno Controller Operator Manual 95
Configuring the export settings and destination
2. Set the item.
.
Adding a server
The authentication information (user name and password) is required to connect to the
drive on the network. Configure the PC to allow connection with the following
authentication information in advance:
No. Name Function
(1) On/Off, Angle,
Format Every touch switches between "ON" and "OFF".
Data is sent to the path(s) that is set to "ON", while no data is sent to
the path(s) that is set to "OFF".
Shows the angle to be sent.
• Choose Primary to send only the angle data that is set as
primary.
• Choose ALL to send all of the protected angle data.
• Choose A , B , C , D , E , or F to send the angle data of the
selected angle(s) among them.
Shows the configured path.
The following restrictions apply to the File Type (container format)
when transferring items:
• Playlists can be transferred only in GXF format. Transfer in MXF
or QuickTime format cannot be performed.
• When you transfer in QuickTime with Metadata format, you
transfer a directory structure that includes xml files that describe
the project, media files, and a .mov file.
(2) Delete Deletes the selected transfer destination
Back Returns to the Network screen
Add Adds a new transfer destination
Browse Lets you scroll through the list of available K2 Summit servers or add
a new K2 Summit server as a transfer destination.
(1)
(2)