Grass Valley K2 Dyno v.2.0 - Manual (Page 40)

40 K2 Dyno Controller Operator Manual 14 June 2011
Chapter 3 Playback
Angle switching behavior
When you switch camera angles, play speed behaves as follows:
On-air preview mode and Gang mode
If two or more channels are assigned as players, you can operate the controller with
the option of the on-air preview and multi-channel modes.
The on-air preview mode is a mode to use one channel as a program channel (a
channel for an on-air broadcast) while using another channel as a preview channel.
While in gang mode, you can switch operation targets for multiple channels or gang
the playback for multiple channels.
Playback operations in the on-air preview mode
This section describes a flow of playback operations in the on-air preview mode.
1. In the Home screen, make sure that the controller is in the on-air preview mode.
• If the controller is in gang mode, both P1 and P2 show in the Status Indicator
line of the Home screen.
Super Slo-Mo x3 clip
<
==================
>
Super Slo-Mo x3 clip
Internal speed 100%
Display speed 33%
Internal speed 33%
Display speed 33%
Play Mode
Keep internal speed
Super Slo-Mo x3 clip
<
==================
>
Super Slo-Mo x3 clip
Internal speed 100%
Display speed 33%
Internal speed 100%
Display speed 100%
Variable Mode
Keep display speed
Super Slo-Mo x3 clip
<
==================
>
Super Slo-Mo x3 clip
Internal speed 100%
Display speed 33%
Internal speed 33%
Display speed 33%
LIve Mode
Keep display speed
Super Slo-Mo x3 clip
<
==================
>
Super Slo-Mo x3 clip
Internal speed 300%
Display speed 100%
Internal speed 100%
Display speed 100%
Variable Mode