Grass Valley K2 Dyno v.2.0 - Manual (Page 91)

14 June 2011 K2 Dyno Controller Operator Manual 91
Network settings
.
Network settings
You can set settings for video and audio mix effects.
1. Touch the Config tab, and then touch Network .
2. Set items. For information about the indication meanings and individual panel
functions, see the following table.
No. Name Function
(1) Flying M/E Flying M/E is an effect for switching angles or changing cue up points.
For flying mix effects, specify the duration of the effect (up to a
maximum of 15 frames),
whether the effect is applied to video, audio,
or both, and whether to use a dissolve or matte effect.
(2) M/E 1-5 For up to five mix effects, specify the duration of the effect, whether
the effect is applied to video, audio, or both, and whether to use a
Dissolve or Matte effect.
(3) Matte color If the Matte effect is selected, the Matte color displays. Touch the color
to bring up the palette of available colors.
(4) Exit Opens the Exit Options screen.
Sessions Lists the sessions saved on this Dyno controller. You can delete one or
all sessions not currently in use. Deleting previous session frees up
space on the Dyno.
Rec Stop Stops recording
Chan List Displays the configurations of the channels on the Summit used with
the current session.
Load Opens a saved keyword or configuration file.
Audio Opens the Audio Meters panel.
Save Saves the configuration settings in a file.
(1)
(2)
(3)
(4)