Grass Valley K2 Dyno v.2.0 - Manual (Page 61)

14 June 2011 K2 Dyno Controller Operator Manual 61
Checking the transfer progress
An icon to show the transfer status is displayed in the shot box of the transferred
item(s). For more information about the meanings of icons, see
"About shot box
indications" on page 55 .
Checking the transfer progress
The Transfer screen is divided into three tabs: Receiving, Sending, and Complete.
The first line of each transfer shows the transfer source path and the file name as well
as the camera angle. The second line shows the transfer destination path and name. A
progress bar displays the progress during a transfer.
1. Touch the Config tab to display the Config screen.
2. Touch Transfers .
The transfer progress displays.
• Pending — while a transfer is in progress.
• Done — when the transfer is complete.
• Failed — when the transfer progress is failed because of an error.
• Aborted — when the transfer progress is canceled.
3. To retry a transfer, touch the desired transfer and touch Retry .