Grass Valley K2 Dyno v.2.0 User Manual
Page 41
14 June 2011
K2 Dyno Controller Operator Manual
41
Playback operations in the on-air preview mode
• If the controller is in the on-air preview mode, the Status Indicator line on the
Home screen shows
PVW
or
PGM
. Switch to the on-air preview mode by
pressing the
PGM
or
PVW
button after pressing the
Shift
button.The program
channel becomes the target for operations.
2. Begin a live playback in the program channel.
3. Press the
P2
button.
The
P2(PVW)
and
Take
button light up in green while the preview control is turned
on. When you turn on the preview control, the preview channel becomes the target
for all of the operations, such as operations with the
Live
button, T-Bar, or Jog
knob.
4. Locate the scene you want to broadcast on air in the preview channel.
5. Locate and put the scene in standby, performing operations such as rewinding the
live video in the preview channel, or cueing up to the beginning of a playlist or
highlight using the Jog knob.
Program Channel
Preview Channel
Program Channel
Preview Channel