Grass Valley K2 Dyno v.2.0 - Manual (Page 33)

14 June 2011 K2 Dyno Controller Operator Manual 33
Switching to Maintenance mode (the Windows OS)
normal shut down operation as with the Windows OS. When asked if you want to
return to the K2 Dyno mode, choose
Yes .
The Dyno controller restarts with the Dyno software running.
5. To shut down the Dyno controller after using Maintenance mode, perform a normal
shut down operation as with the Windows OS. When asked if you want to return to
the Dyno mode, choose
No.
The Dyno controller shuts down.The next time you start up the Dyno controller,
the Dyno software will not start; the Dyno controller continues in the Maintenance
mode.