Grass Valley K2 Dyno v.2.0 - Manual (Page 49)

14 June 2011 K2 Dyno Controller Operator Manual 49
Cueing up an item by specifying it with a number (GoTo)
takes you to bin 1, slot 3.
3. To locate a timecode, touch Timecode and enter the number in the keypad. If you
enter a timecode, the +, or - buttons let you tweak the value so you don’t have to
enter in a complete new timecode. You can specify a timecode from 0 to 24 hours
in the same session.
4. Enter the number or timecode, and then press OK .