Grass Valley K2 Dyno v.2.0 - Manual (Page 94)

94 K2 Dyno Controller Operator Manual 14 June 2011
Chapter 9 Settings
3. If configuring the Alternative settings, refer to the following table.
Configuring the export settings and destination
1. In the Config tab, touch Network | Send list .
The Transfer Destinations screen opens.
No. Name Function
(1) Alternate setting Select to apply remaining settings to T-Bar operation when the “ALT
T-BAR” button is on in Play Option.
(2) Configure position Enter your desired T-Bar position as a numeric value.
(3) Speed Set the playing speed corresponding to the T-Bar position.
(1)
(2)
(3)