Grass Valley K2 Dyno v.2.0 - Manual (Page 20)

20 K2 Dyno Controller Operator Manual 14 June 2011
Chapter 1 Component Names and Functions
(5) Camera selection Switches the camera angles, which are assigned to A, B, C, D, E, or F.
(6) Fn Turns to the function mode. If you press the Fn button and then press
a corresponding button, the button action that is performed may be
different from the normal one. For more information, see the operation
instructions in each chapter.
(7) Fast Switches to the Fast Jog mode. This is toggle switch, so it turns off if
you press this button when it is in Fast mode. The speed for the fast
forward and rewind operations using the Jog knob becomes faster. The
Previous/Next buttons light up in green while in the Fast Jog mode.
You can also set the controller so that the normal Jog mode and Fast
Jog mode are switched automatically. For more information, see
"Fast-Jog multiplier" on page 88
Play Plays the item with the 100% speed.
(8) Open Press this while an item is selected to create a new playlist and stores
the item to the playlist.
Press this while a bin or playlist is selected to open the bin or playlist.
Stop Stops the playback.
(9) Previous/Next Moves the playback pointer. The action after the move depends on the
current condition. For example, if you press this while cueing up to an item,
the controller cues up to the In point of the previous/next item, If you press
this during an item playback, the controller plays the previous/next item
after the playback pointer moves to the In point of the previous/next item.
(10) Local You are controlling your replay in still, slow motion, or normal playout
mode. The recording of the live video continues while you are in this
mode.
Live You are watching the live video of the selected channel being
recorded.
(11) Brws You can browse remote record trains.
Add Mrk Adds a mark on the record train.
(12) PGM/PVW Switches to the on-air preview or multi-channel mode. For more
information, see
"On-air preview mode and Gang mode" on page 40 .
P1/P2 While in the on-air preview mode, it switches the operation target
channel. If you press the
P1 button, the program channel (the channel
for an on-air broadcast) becomes the target for operations. If you press
the
P2 button, the preview channel becomes the target for operations.
While in the multi-channel Gang mode, it switches the operation target
to the channel assigned to the
P1 / P2 button. In addition, pressing the
P1 and P2 buttons at the same time while in the multi-channel mode
switches to the Gang mode.
For more information, see
"On-air preview mode and Gang mode" on
page 40 .
No. Name Function