Grass Valley K2 Dyno v.2.0 - Manual (Page 29)

14 June 2011 K2 Dyno Controller Operator Manual 29
Multichannel independent mode
• The 2 Record and 2 Playback channel set-up is done when the session is configured
at start-up screen
• A,B, angles can be selected for playback on P1 or P2
• P1 and P2 playout channel content can be “swapped” by pressing buttons Fn then
Take.
A
Record Record
Play Play
P2 P1
C1
C4
P2
C3
P1
B
C2
Cue A or B angle on P1
or P2 channel.
Playback independently Select either P1 or
P2 button to control
that playout channel.