Grass Valley K2 Dyno v.2.0 - Manual (Page 89)

14 June 2011 K2 Dyno Controller Operator Manual 89
Clip settings
Clip settings
You can set settings for clips.
1. Touch the Config tab, and then touch Clip .
2. Set items. For information about the indication meanings and individual panel
functions, see the following table.
(6) Exit Opens the Exit Options screen.
Sessions Lists the sessions saved on this Dyno controller. You can delete one or
all sessions not currently in use. Deleting previous session frees up
space on the Dyno.
Rec Stop Stops recording
T-Bar Sets the T-bar speeds
Load Opens a saved keyword or configuration file.
Touch Opens the touch screen calibration screen.
Save Saves the configuration settings in a file.
No. Name Function
(1) Default Duration Touch the timecode to change the default duration for clips by entering
a value. This setting will be reflected as the duration in cases where you
store a mark with only the In point to a highlight/playlist, or you press
the
Out button without pressing In button to create a scene during a
live playback or while playing the record train.
No. Name Function
(1)
(2)
(5)
(7)
(6)
(3)
(4)