Grass Valley K2 Dyno v.2.0 - Manual (Page 46)

46 K2 Dyno Controller Operator Manual 14 June 2011
Chapter 4 Marking Function
Components in the Mark screen
Mark-in and mark-out points are added on the record train. When you are making a
recording, you can mark live video while you are watching the video from the camera
even during a replay or playlist playback.
A single mark-in or mark-out point is referred to as a marker. A mark-in and mark-out
point together are referred to as a scene.
The Mark screen displays the markers and scenes that were added to the record train.
1. Touch the Mark tab.
• The Mark screen appears. For more information about the indication meanings
and individual panel functions, see the following table. To perform functions
(indicated by the shaded area in the table) that are displayed at the top of the
menu panels shown at the bottom of the screen, press the
Shift button, and then
touch the desired menu panel. For more information on how to use the Shift
button, see "About Shift button operations" on page 21 .
No. Name Function
(1) TimeCode Shows the timecodes of the In point and/or the Out point.
(2) Log Shows the angle.
(3) Info If the item has metadata, it is displayed here.
(4) Property panel Shows the number and name of the selected item. You can also touch
the panel to enter metadata information for the selected item.
(5) In/Out panel Shows the selected item's timecodes of the mark-in and mark-out
points.
(4)
(1)
(5)
(6)
(2) (3)