Grass Valley K2 Dyno v.2.0 - Manual (Page 86)

86 K2 Dyno Controller Operator Manual 14 June 2011
Chapter 9 Settings
Controller settings
You can change various settings for the K2 Dyno Controller to suit your preferences
in the Config screen. The settings can be exported to a USB storage device to import
them to another K2 Dyno Controller. For information about importing and exporting,
see
"Importing/Exporting" on page 103 .
1. Touch the Config tab.
• The Config screen appears. For information about the indication meanings and
individual panel functions in each setting screen, refer to the description for each
setting.
Notes for displaying the Config screens simultaneously on two K2 Dyno Controllers
When two K2 Dyno Controllers are joining in the same session, any settings that are
changed screen on either of the controllers will be applied to the other one
automatically. If changes are being made to the configuration on both controllers, the
last change made on either controller takes effect.
Record train length allocation settings
Loop length is the amout of record time before the Dyno Controller starts
overwriting.The actual available recording time depends on the remaining space in
the Summit.