Grass Valley K2 Dyno v.2.0 - Manual (Page 88)

88 K2 Dyno Controller Operator Manual 14 June 2011
Chapter 9 Settings
Panel settings
You can set settings for video and audio mix effects.
1. Touch the Config tab, and then touch Panel .
2. Set items. For information about the indication meanings and individual panel
functions, see the following table.
.
No. Name Function
(1) Fast-Jog multiplier Set the jog speed the speed multiplied by the selected value in reference to
the normal jog speed.
(2) Knob sensitivity Set the sensitivity of the Jog knob
(3) T-bar engage mode Also referred to as lever engage mode. Select Direct to reflect the
T-Bar operation to the playback speed immediately after you operate
the T-Bar.
Select
Cur Speed to reflect the T-Bar operation when it is set faster
than the current speed.
(4) Screen brightness Determine the overall brightness of the screen. You can adjust the
brightness for maximum visibility for the lighting of the room that the
Dyno Controller is located in.
(5) Button brightness Determine the brightness of the buttons. You can adjust the brightness
for maximum visibility for the lighting of the room that the Dyno
Controller is located in.
(1)
(2)
(3)
(4)
(5)
(6)