H3C Technologies H3C S12500 Series Switches User Manual

Page 67

[SwitchA-Vlan-interface100] quit

[SwitchA] rip 2

[SwitchA-rip-2] version 2

[SwitchA-rip-2] undo summary

[SwitchA-rip-2] network 192.168.3.0

[SwitchA-rip-2] quit

# Configure Switch C.

system-view

[SwitchC] rip 1

[SwitchC-rip-1] version 2

[SwitchC-rip-1] undo summary

[SwitchC-rip-1] network 192.168.2.0

[SwitchC-rip-1] network 192.168.4.0

[SwitchC-rip-1] network 100.1.1.0

[SwitchC-rip-1] peer 192.168.1.1

[SwitchC-rip-1] undo validate-source-address

[SwitchC-rip-1] import-route static

[SwitchC-rip-1] quit

[SwitchC] interface vlan-interface 200

[SwitchC-Vlan-interface200] rip bfd enable

[SwitchC-Vlan-interface200] quit

# Configure Switch D.

system-view

[SwitchD] rip 1

[SwitchD-rip-1] version 2

[SwitchD-rip-1] undo summary

[SwitchD-rip-1] network 192.168.3.0

[SwitchD-rip-1] network 192.168.4.0

Configure BFD parameters:
# Configure Switch A.

[SwitchA] bfd session init-mode active

[SwitchA] interface vlan-interface 100

[SwitchA-Vlan-interface100] bfd min-transmit-interval 500

[SwitchA-Vlan-interface100] bfd min-receive-interval 500

[SwitchA-Vlan-interface100] bfd detect-multiplier 7

[SwitchA-Vlan-interface100] quit

# Configure Switch C.

[SwitchC] bfd session init-mode active

[SwitchC] interface vlan-interface 200

[SwitchC-Vlan-interface200] bfd min-transmit-interval 500

[SwitchC-Vlan-interface200] bfd min-receive-interval 500

[SwitchC-Vlan-interface200] bfd detect-multiplier 7

[SwitchC-Vlan-interface200] quit

Configure static routes:
# Configure a static route to Switch C on Switch A.

[SwitchA] ip route-static 192.168.2.0 24 vlan-interface 100 192.168.1.2

[SwitchA] quit

This manual is related to the following products: