H3C Technologies H3C S12500 Series Switches - Manual (Page 378)

362
Step Command Remarks
3. Enter IPv6 address family view
or IPv6 BGP-VPN instance
view.
ipv6-family [ vpn-instance
vpn-instance-name ]
N/A
4. Configure the filtering of
outgoing routes.
filter-policy { acl6-number | ipv6-prefix
ipv6-prefix-name } export [ protocol
process-id ]
Not configured by default.
5. Apply a routing policy to
routes advertised to an IPv6
peer or peer group.
peer { group-name | ipv6-address }
route-policy route-policy-name export
Not applied by default.
The IPv6 BGP-VPN instance
view does not support the
group-name argument.
6. Specify an IPv6 ACL to filter
routes advertised to an IPv6
peer or peer group.
peer { group-name | ipv6-address }
filter-policy acl6-number export
Not specified by default.
The IPv6 BGP-VPN instance
view does not support this
command.
7. Specify an AS path ACL to
filter routes advertised to an
IPv6 peer or peer group.
peer { group-name | ipv6-address }
as-path-acl as-path-acl-number export
Not specified by default.
The IPv6 BGP-VPN instance
view does not support this
command.
8. Specify an IPv6 prefix list to
filter routes advertised to an
IPv6 peer or peer group.
peer { group-name | ipv6-address }
ipv6-prefix ipv6-prefix-name export
Not specified by default.
The IPv6 BGP-VPN instance
view does not support this
command.
Configuring inbound route filtering
Only routes passing the configured filtering can be added into the local IPv6 BGP routing table.
Members of a peer group can have different inbound route filtering policies.
To configure inbound route filtering:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter BGP view. bgp as-number N/A
3. Enter IPv6 address family view
or IPv6 BGP-VPN instance
view.
ipv6-family [ vpn-instance
vpn-instance-name ]
N/A
4. Configure inbound route
filtering.
filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name }
import Not configured by default.
5. Apply a routing policy to
routes from an IPv6 peer or
peer group.
peer { group-name |
ipv6-address } route-policy
route-policy-name import
Not applied by default.
The IPv6 BGP-VPN instance view
does not support the group-name
argument.