beautypg.com

Configuring the next_hop attribute – H3C Technologies H3C S12500 Series Switches User Manual

Page 240

background image

224

Step Command

Remarks

1.

Enter system view.

system-view

N/A

2.

Enter BGP view or BGP-VPN
instance view.

Enter BGP view:

bgp as-number

Enter BGP-VPN instance view:

a.

bgp as-number

b.

ipv4-family vpn-instance

vpn-instance-name

Use either method.

3.

Enable the comparison of
MEDs for routes on a per-AS

basis.

bestroute compare-med

Optional.
Not enabled by default.

Enabling the comparison of MED of routes from confederation peers

The MED attributes of routes from confederation peers are not compared if their AS_PATH attributes

contain AS numbers that do not belong to the confederation, such as these three routes: AS_PATH

attributes of them are 65006 65009, 65007 65009, and 65008 65009, and MED values of them are

2, 3, and 1. Because the third route contains an AS number that does not belong to the confederation,

the first route becomes the optimal route.
To enable the comparison of MED of routes from confederation peers:

Step Command

Remarks

1.

Enter system view

system-view

N/A

2.

Enter BGP view or BGP-VPN
instance view.

Enter BGP view:

bgp as-number

Enter BGP-VPN instance view:

a.

bgp as-number

b.

ipv4-family vpn-instance

vpn-instance-name

Use either method.

3.

Enable the comparison of
MED of routes from

confederation peers.

bestroute med-confederation

Optional.
Not enabled by default.

Configuring the NEXT_HOP attribute

By default, when advertising routes to an IBGP peer or peer group, a BGP router does not set itself as the

next hop. However, to ensure a BGP peer can find the correct next hop in some cases, you need to

configure the router as the next hop for routes sent to the peer.
For example, as shown in

Figure 84

, Router A and Router B establish an EBGP neighbor relationship, and

Router B and Router C establish an IBGP neighbor relationship. When Router B advertises a network

learned from Router A to Router C, if Router C has no route to IP address 1.1.1.1/24, you need to configure

Router B to set itself as the next hop (3.1.1.1/24) for the route to be sent to Router C.