H3C Technologies H3C S12500 Series Switches - Manual (Page 392)

376
Configuring basic 6PE capabilities
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter BGP view. bgp as-number N/A
3. Specify the AS number for
the 6PE peer or peer group. peer { ipv4-group-name |
ipv4-address } as-number as-number
Not specified by default.
4. Enter IPv6 address family
view.
ipv6-family N/A
5. Enable the 6PE peer or peer
group. peer { ipv4-group-name | ipv4-address
| ipv6-address } enable
Not enabled by default.
6. Enable the router to
exchange labeled IPv6
routes with the 6PE peer or
peer group.
peer { ipv4-group-name |
ipv4-address } label-route-capability
Not enabled by default.
Configuring optional 6PE capabilities
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter BGP view. bgp as-number N/A
3. Specify the AS number for the
6PE peer or peer group. peer { ipv4-group-name |
ipv4-address } as-number as-number
Not specified by default.
4. Enter IPv6 address family
view.
ipv6-family N/A
5. Enable the 6PE peer or peer
group. peer { ipv4-group-name |
ipv4-address | ipv6-address } enable
Not enabled by default.
6. Advertise community attribute
to the 6PE peer or peer group.
peer { group-name | ipv4-address }
advertise-community Optional.
Not advertised by default.
7. Advertise extended
community attribute to the 6PE
peer or peer group.
peer { group-name | ipv4-address }
advertise-ext-community Optional.
Not advertised by default.
8. Allow the local AS number to
appear in routes from the peer
or peer group and specify the
repeat times.
peer { group-name | ipv4-address }
allow-as-loop [ number ] Optional.
Not allowed by default.
9. Specify an AS path ACL to
filter routes from or to the 6PE
peer or peer group.
peer { group-name | ipv4-address }
as-path-acl as-path-acl-number
{ import | export }
Optional.
Not configured by default.
10. Advertise a default route to
the 6PE peer or peer group.
peer { group-name | ipv4-address }
default-route-advertise [ route-policy
route-policy-name ]
Optional.
Not advertised by default.