Protocols and standards, Bgp configuration task list – H3C Technologies H3C S12500 Series Switches User Manual
Page 220

204
View names
Ways to enter the views
Remarks
BGP-L2VPN address family
view
[Sysname] bgp 100
[Sysname-bgp]
l2vpn-family
[Sysname-bgp-af-l2vpn]
Configurations in this view are effective
only for MPLS L2VPN BGP routes.
BGP-VPLS address family
view
[Sysname] bgp 100
[Sysname-bgp]
vpls-family
[Sysname-bgp-af-vpls]
Configurations in this view are effective
only for VPLS BGP routes.
Protocols and standards
•
RFC 1700, ASSIGNED NUMBERS
•
RFC 1771, A Border Gateway Protocol 4 (BGP-4)
•
RFC 2858, Multiprotocol Extensions for BGP-4
•
RFC 3392, Capabilities Advertisement with BGP-4
•
RFC 2918, Route Refresh Capability for BGP-4
•
RFC 2439, BGP Route Flap Damping
•
RFC 1997, BGP Communities Attribute
•
RFC 2796, BGP Route Reflection
•
RFC 3065, Autonomous System Confederations for BGP
•
RFC 4271, A Border Gateway Protocol 4 (BGP-4)
•
RFC 4360, BGP Extended Communities Attribute
•
RFC 4724, Graceful Restart Mechanism for BGP
•
RFC 4760, Multiprotocol Extensions for BGP-4
•
RFC 5291, Outbound Route Filtering Capability for BGP-4
•
RFC 5292, Address-Prefix-Based Outbound Route Filter for BGP-4
BGP configuration task list
In a basic BGP network, you only need to perform the following configurations:
•
Enable BGP.
•
Configure BGP peers or peer groups.
•
Control BGP route generation.
To control BGP route distribution and path selection, you must perform other configurations.
Complete the following tasks to configure BGP:
Task Remarks
Required.