Alinco DJ-X11 - Manual (Page 95)

10
10. Set Mode Confi gurations
95
10-8 Remote Controller Setting
This menu is available only when the optional remote controller EDS-12 is used.
You can assign the functions listed in the table below to the remote controller keys
as desired. The remote controller has four keys for function assignment: A through D.
145.000
F M
VFO
B S
<
EDS-12 KEY
>
1 Select from the
Set mode menu.
2
Press the
SET
CLR
key to display the
sub menu.
3 Rotate the upper dial to select from “EDS-12 A button”
to “EDS-12 D button”.
4 Rotate the lower dial to select the function assigned to
the [A] to [D] key.
Initial
assignment
Menu name Function
KEY A Active band
KEY B Band change
KEY C Freq. up Holding down the key (approx. 2 seconds) starts scanning.
KEY D Freq. down Holding down the key (approx. 2 seconds) starts scanning.
Select input * The setting is switched every time the key is pressed (P. 103).
MONI key
V/P/M key
Volume up
Volume down
Sql. level up
Sql. level down
Attenuator
Antenna
Bar antenna
Priority
RF gain
AF tone
Beep
Bell
CTCSS
CTCSS reverse
DCS
*This function selects whether to switch to the DJ-X11 automatically when
the squelch opens, or to manualy switch the audio input from the portable
audio player.