Alinco DJ-X11 - Manual (Page 74)

74
10. Set Mode Confi gurations
10
● Setting the Set mode items
1 Press the [FUNC] key to display on the LCD.
2
Press the
SET
CLR
key to switch to Set mode.
3 Rotate the upper dial to select the Set mode menu.
4
Press the
SET
CLR
key to display the sub menu.
5 Rotate the upper dial to select the sub menu and rotate
the lower dial to change the setting.
6 Press the [MONI] key to return to the Set mode menu se-
lection screen.
7 Press the [FUNC] key to confi rm the setting and exit the
Set mode.
MEMO
• If you exit the set mode from sub-menu status,DJ-X11 resumes the
last-operated sub menu.
10-1 Receiver Setting
Use this menu to set basic receiver options.
145.000
F M
VFO
B S
<
RECEIVER
>
1 Select from the
Set mode menu.
2
Press the
SET
CLR
key to display the
sub menu.
10-1-1 Bar antenna setting
Use this setting to switch the antenna used to receive signals in the AM
radio band between the built-in bar antenna and an antenna connected to
SMA port.
145.000
F M
VFO
B S
Bar antenna
ON
1 Rotate the upper dial to select
“Bar antenna”.
The LCD displays the information as
shown on the right.
2 Rotate the lower dial to select “ON” or “OFF”.
The built-in bar antenna is the default antenna used to receive AM radio
band signals. To use the supplied whip antenna, you need to connect it to
the antenna connector (SMA).