Alinco DJ-X11 - Manual (Page 82)

82
10. Set Mode Confi gurations
10
10-3-2 Battery setting
Use this setting to display the battery level icons correctly.
145.000
F M
VFO
B S
Battery type
Battery pack
1 Rotate the upper dial to select
“Battery type”.
The LCD displays the information as
shown on the right.
2 Rotate the lower dial to select “Battery pack” or “Dry
Battery”.
MEMO
• Icon display
When "Battery pack" is selected
When "Dry Battery" is selected
CAUTION
• When this setting is incorrect, the battery level (remaining power) is not
displayed properly; however, operation continues normally.
• Be sure to use alkaline dry batteries.
• Commercially-available rechargeable AA batteries cannot be used.
The use of such batteries is not covered by our warranty because it is
highly possible that such use may lead to malfunction, breakdown, so-
lution leakage, and heat generation.
10-3-3 Battery save function setting
Use this function to internally turn ON/OFF the power at short intervals
to save the battery by reducing the current consumption during standby
mode.
145.000
F M
VFO
B S
BS ratio
0. 2 : 0. 8
1 Rotate the upper dial to select
“BS ratio”.
The LCD displays the information as
shown on the right.