Alinco DJ-X11 - Manual (Page 28)

28
5. Basic Operation
5
5-7 Selecting the Band to Operate
Select either the main band or sub band to operate.
Refer to (P. 33) for the range of the receivable frequencies for each band.
433.000 VFO
F M
F M
B S
145.000
VFO
1 Press the key or key to
select the band to operate.
When the dual-band display is selected,
the frequency of the selected band is
displayed in larger letters. When the
mono-band display is selected, only
the frequency of the selected band is
displayed.
2 Pressing the key or key
again changes the band.
433.000
145.000
VFO
F M
F M
B S
VFO
MEMO
• By holding down the key and rotating the upper dial, you can
change the band quickly.
• indicates that the main band is currently selected for operation;
indicates that the sub band is currently selected for operation.
5-7-1 Mono-band operation
● Using the main band with mono-band operation
F M
B S
145.000
VFO
1 Hold down the key (approx.
one second).
The main band is displayed with the
mono-band display. To return to the dual-
band display, repeat the same operation
again.
● Using the sub band with mono-band operation
433.000
VFO
F M
B S
1 Hold down the key (approx.
one second).
The sub band is displayed with the mono-
band display.
To return to the dual-band display, repeat
the same operation again.