Alinco DJ-X11 - Manual (Page 29)

6. Operating Modes
29
6
6.
Operating Modes
The DJ-X11 has three operating modes: VFO, Preset, and Memory.
VFO mode VFO stands for Variable Frequency Oscillator.
You can select a desired frequency by rotating the
dial. You can operate the receiver like a normal
radio.
Preset mode The audio frequencies for AM/FM radio and TV
channels have alreday been set so that you can
choose among them just like a conventional
radio.
Memory mode You can program frequencies to memory
channels beforehand and call up one when you
wish. For the frequency programming procedure,
refer to "Memory Mode"(P. 34).
This function is similar to the address book of a
mobile phone.
CAUTION
• For TV sound channels, only analog terrestrial broadcasting can be
received. The TV sound from digital terrestrial broadcasting cannot be
received.
• Switching between operating modes
Pressing the
key changes operating modes in the following order.
Preset
VFO
Memory
MEMO
• The preset mode can be excluded from the operation modes.
• For details, refer to “Preset mode setting (P. 75).