Alinco DJ-X11 - Manual (Page 3)

NOTICE / Compliance Information Statement
3
Conformity Information
Alinco, Inc. Electronics Division hereby declare on our sole responsibility that the
product(s) listed below comply the essential requirements of the Directive 1999/5/
EC, The council of 3/9/99 on Radio Equipment and Telecommunication Terminal
Equipment and the mutual recognition of their conformity and with the provisions
of Annex, after having performed the required measurements at Notifi ed Bodies
per Standards, and relative certifi cate(s) or document(s) can be reviewed at http://
www.alinco. com/Ce/
DJ-X11E: Wide Band Communication Receiver 0.05 - 1299.99995MHz
DJ-X11EGR: Portable broadcast/hamband Receiver 0.522 - 1.62000MHz
53.75 - 67.7500MHz
87.60 - 107.9000MHz
144.00 - 145.99995MHz
180.75 - 229.7500MHz
430.00 - 439.99995MHz
476.75 - 860.7500MHz
1260.00 - 1299.99995MHz
Function: DJ-X11E DJ-X11EGR
Inversion scramble decoder: Available N/A
DJ-X11E is authorized for use in all EU and EFTA member states except for Greece.
DJ-X11EGR is authorized for use in all EU and EFTA member states.
DJ-X11E : Band-plan setting instruction
In Europe, there are slight differences in frequency allocation country by country.
Therefore the DJ-X11E has been preprogrammed with different VFO and Preset
tables(band-plans) so that it will become handy when you travel. Select one of the
band-plans by pressing the numeric key as instructed below when turning on the unit.
The band plan
Hold 2key while turning on : Pan-Europe
Hold 3key while turning on : UK
Please refer(P. 110)for the details of the band-plans.
Copyright © All rights reserved. No part of this document may be reproduced,
copied, translated or transcribed in any form or by any means without the prior
written permission of Alinco. Inc., Osaka, Japan, English Edition Printed in Japan.