Alinco DJ-X11 - Manual (Page 67)

9
9. Useful Functions
67
9-8 DCS Scan
The DCS scan automatically detects DCS codes in the received radio signals.
1 In VFO mode, tune to the frequency to search for a DCS
code.
145.000
F M
B S
VFO
DCS scan
2 Hold down the key and
rotate the upper dial to select
“DCS scan”.
3 Release the key to start scanning.
Scanning starts. DCS codes being searched for are displayed on the LCD
one at a time.
When a matching DCS code is found, a beep sounds, "
" and
the DCS code are displayed on the LCD, and scanning stops. Scanning
continues when no DCS code is found in the received radio signals.
4 Press the [FUNC] or key to stop scanning.