Alinco DJ-X11 - Manual (Page 101)

13
13. Reset Function
101
13.
Reset Function
The DJ-X11 provides two types of reset operations: Partial reset which initializes
only the Set mode and LCD display settings; and All reset which deletes memory
data as well.
CAUTION
• Remember that you cannot restore data deleted in Memory mode.
13-1 Reset
This function resets the DJ-X11 to the condition before shipment.
Use this function if you get lost while operating the DJ-X11 or if the DJ-X11 does
not operate properly.
● Partial reset
1 Turn off the DJ-X11
2 While holding down the [FUNC] key, turn on the DJ-X11.
3 When “Reset completed” appears on the LCD, release
the key.
● All reset
This function is not used under normal conditions. The All reset should
be used only by advanced users on rare occasions such as to edit all
memory data by themselves. For the procedure, refer to (P. 106).