Alinco DJ-X11 - Manual (Page 92)

92
10. Set Mode Confi gurations
10
10-6-2 Memory name display setting
When memory names have been set, use this setting to select whether to
display a memory name or frequency.
Name display
Memory name
145.000
F M
VFO
B S
1 Rotate the upper dial to select
“Name display”.
The LCD displays the information as
shown on the right.
2 Rotate the lower dial to select “Memory name” or “Fre-
quency”.
Even when “Memory name” is selected, you can display a frequency
temporarily by holding down the [MONI] key.
Also, when “Frequency” is selected, you can display a memory name
temporarily by holding down the [MONI] key.
10-7 Sound Setting
Use this menu to set sound-related options.
145.000
F M
VFO
B S
<
SOUND
>
1 Select from the Set
mode menu.
2
Press the
SET
CLR
key to display the
sub menu.
10-7-1 Beep setting
Use this setting to enable or disable the beep sound produced when a key
is pressed.
Beep
Enable
145.000
F M
VFO
B S
1 Rotate the upper dial to select
“Beep”.
The LCD displays the information as
shown on the right.
2 Rotate the lower dial to select “Enable” or “Disable”.
CAUTION
• Selecting “Disable” also disables the alarm for the bell function.